How To Cut Angle On Table Saw

An angle cut is a cut that forms an angle in the wood. It is a basic woodworking technique used in building furniture, cabinets, and other woodworking projects. It is an essential skill to have when working with a table saw.

Tools Needed

To cut an angle on a table saw, you need the following tools:

• Table saw
• Marker
• Measuring tape

Safety Precautions

Safety should always be your first priority when using a table saw. Before using the table saw, make sure to wear safety glasses or goggles and keep your fingers away from the blade. Take your time and don’t rush, and always unplug the table saw when not in use.

Step-by-Step Guide

Mark the cutting line on the workpiece. Use a marker to draw a line where the angle cut will be made. Measure the angle with a measuring tape and mark the angle on the workpiece.

Set the saw blade angle. The saw blade can be set to any angle from 0 to 45 degrees. Adjust the angle of the saw blade to match the angle on the workpiece.

Adjust the miter gauge. The miter gauge is used to guide the workpiece through the blade. Set the miter gauge to the same angle as the saw blade.

Make the cut. Place the workpiece against the miter gauge and slowly push it through the saw blade. Keep your hands away from the blade and don’t rush.

Finishing Touches
When the cut is complete, check the accuracy of the cut and sand down any rough spots.

Gather Your Materials

Before you start cutting, you’ll need to make sure you have everything you need on hand. Here’s what you’ll need:

• Table saw with a miter gauge
• Fence
• Board to cut
• Taper guide (optional)
• Pencil
• Safety gear (eye and ear protection)

Set Up Your Workspace

To make accurate angled cuts, it’s important to have a clean, organized workspace. Follow these steps to set up your workspace:

• Clear your workspace of any debris or obstructions.
• Make sure your saw blade is in good condition and properly aligned.
• Adjust the blade height to the desired cutting depth.
• Set the angle on the miter gauge using the handle.

Make the Cut

Once your workspace is set up, it’s time to make the cut. Follow these steps for a successful angled cut:

• Make a pencil line for where you want the cut to start and end.
• Lock the miter gauge in place so it doesn’t move when you start pushing it along the miter slot.
• Place the board you want to cut against the fence.
• Push the board and fence toward the saw blade.
• Hold the fence and board together with your dominant hand.
• Place your opposite hand on the handle of the miter gauge.
• Begin pushing everything forward at a steady, consistent rate.
• Go slowly to get a consistent cut and avoid kickback.

Additional Tips

Here are a few additional tips to help you get the best results when cutting angles on a table saw:

• If you’re having trouble keeping the board flush against the fence, consider using a taper guide to hold the board in place.
• Practice on scrap wood before attempting a cut on your actual project.
• Always wear safety gear when working with power tools.
• Make sure your workspace is well-lit to ensure accurate cuts.

Conclusion

Cutting angles on a table saw is a fundamental woodworking technique. To do so, you need the right tools, safety precautions, and know-how. Follow the steps outlined in this article to safely make an angle cut.

FAQs

• Author
• Recent Posts

James P Alameda

Author at Saw Bible

James P. Alameda, who has been working in the industry for over 5 years. Our mission is to provide our readers with helpful information and reviews on all types of wood-cutting saws, from traditional handsaws to cutting-edge technology.

Latest posts by James P Alameda (see all)

• How To Cut Tree Limbs Over House - 06/03/2023
• Is Pine Wood Strong - 06/03/2023
• Is Poplar Wood Good For Dining Table - 06/03/2023